Support Center > Search Results > SecureKnowledge Details
Check Point R75.20 HFA 20 for 600 / 1100 Appliance and Security Gateway 80 Technical Level

For more information, see the Check Point 1100 Appliance Product Page and Check Point 600 Appliance Product Page. You can also visit our 2012 Models Security Appliances forum or any other Check Point discussion forum to ask questions and get answers from technical peers and Support experts.

Important Note: This may not be the latest firmware release. To see the latest firmware release, refer to sk97766.

Check Point R75.20 HFA 20 Downloads

Note: To download this package you will need to have a Software Subscription or Active Support plan.


The following issues have been resolved in Check Point R75.20 HFA 20 for Security Gateway 80 and 600/1100 Appliance:

Table of Contents

  • Centrally managing the 1100 appliance via Security Management
  • OS configuration
  • Cloud Management
  • Local Security Management
  • WebUI textual and graphical fixes
  • General appliance management
ID Symptoms
Centrally managing the 1100 appliance via Security Management
01177381 Enhancement: Expand the "Always connect to management using the same IP address" option to sending logs as well
01167861  Cluster peer IP is not excluded from DHCP range 
01153741 "FTW was not complete" message appeared in CLISH incorrectly. 
01179718  Connection to Log Server is done with internal IP address instead of public IP address when working with Static NAT.
01106816  Device's DHCP over Bridge connection is wrongfully blocked by Firewall in a restrictive policy. 
01182361  Setting MTU in Provisioning is global to all LAN and DMZ ports, but it is not applied.
01177853  VPN Remote Access dioes not connect with Security Management Server due to a race condition. 
01151973  Cannot set DMZ interface via SmartProvisioning GUI.
01188414 Security Zones are not enforced on R75.20 HFA_10 for 1100 appliance managed by R75.47. 
OS configuration
01178709 DHCP Relay collision with PPP Internet connections.
01096431  Impossible to disable Internet connection monitoring when using ping servers.
01166907  Enhancement: Support signal strength configuration in wireless radio.
01170003  Enhancement: Added support for directed broadcast.
01167899  Enhancement: Added EAP support to wireless settings.
01168148  Enhancement: Support for multiple DHCP Relays.
01187565  LAN ports duplex mode is not configured properly. 
01167077 PIM protocol does not work in Locally Managed cluster scenario. 
01166705 Enhancement: USB 3G modem pl2303 Driver support.
01188510  When there is a LAN with tag-based VLAN and the LAN port is disabled, the interface comes up after the boot. 
01148448 Incorrect order of routing rules on the Routing page. 
01188437  Enhancement: Added IGMP proxy binary to image.
01176533 MTU may not be set correctly in some configurations. 
Cloud Management
01156228 Enhancement: Added a direct link to LogCloud when relevant.
01157818  Enhancement: Added a link to cloud activation page from the cloud management status widget.
01156225  Enhancement: Added an indication of the cloud management server IP address.
Local Security Management
01177760 Enhancement: Allow disabling inspection of protocols in System Services.
01163235  Enhancement: Added 3D Monitoring and 3D reports links to statistics panel in overview page.
01166892  Cluster configuration wizard error when Internet is configured with PPP connection.
01181768  Wrong port is used when creating a RDP service.
01173967  'Error 00353' appeared after IPS update that is done after "Restore settings" or "License Reactivation" 
01187110  Missing support for "This Gateway" in the 'Source' and 'Destination' fields of the Firewall rulebase. 
01181763  Manual NAT rules wrongfully do not take precendence over Server objects, even without NAT. 
01189236  Drops with "X11" message on high ports. 
01188239  Missing support for Port Address Translation (PAT) in the Servers object. 
01185259  Default size of connection table is set to 25000 instead of 150000.
01185612  Import of P12 certificate fails.
01182543  Recoverable errors during boot caused 'Maintenance' mode. 
01189304  Server using port forwarding on port 80 does not work when SSL VPN is enabled.
01155219  Incorrect online help page is shown when clicking on the 'Help' button.
01175479  Collision between remote access and internal web server when using port forwarding when changing Visitor Mode port.
WebUI textual and graphical fixes
01159488 Enhancement: Added "right click" support in grids.
01185050 Enhancement: Added warnings when there is a collision between port forwarding and Remote Access port on port 443.
01155668 Hotspot portal is corrupted on Internet Explorer 10 under low resolution.
01183452 'Restore Defaults' button does not work in Advanced Settings -> Remote Access port.
01159469 Message displayed in online update widget is misleading showing "not up to date".
General appliance management
01167000 Enhancement: Added support for user defined files in backup/restore and upgrade.
01191929  Security Enchancements.
01141979  Enhancement: System robustness is improved.
01156581  In some scenarios, administrator cannot re-log in after session timed out.
01163585  3D reports do not display an indication that relevant blades are off or not licensed.
00927154  Empty column appears in top bandwidth chart.
01165394 URL Filtering categorization uses Application Control categorization.
01305188 "Mobile Client for PC" (SecureConnect) Remote access users fail to connect to 1100 Appliance.
This solution is about products that are no longer supported and it will not be updated

Give us Feedback
Please rate this document