Support Center > Search Results > SecureKnowledge Details
Best Practices - E80 Endpoint Security Management Server Performance
Solution

Endpoint Security Management E80 has undergone extensive testing with various quantities of devices and users. In this article, we present best practices for performance configuration, based on the number of devices you plan to install.

Number of Devices

The Endpoint Security Management E80 server supports up to 5000 deployed Endpoint Security devices.

In order to support 15000 devices, please perform the following changes in the server configuration file. Please modify the following directives in the server configuration file, %UEPMDIR%\engine\conf\server.xml and restart the server.

  1. Set backlog="200" in the AJP connector.
  2. Add connectionTimeout="600000" to the AJP connector.
  3. In the command line, run cpstop and then cpstart.

Below is an example of AJP connector code before the change:

<!-- Define an AJP 1.3 Connector on port 8009 -->

<Connector port="8009" protocol="AJP/1.3" backlog="100"

address="127.0.0.1" maxThreads="500"

useBodyEncodingForURI="true" enableLookups="false"/>

Below is an example of AJP connector after the change:

<!-- Define an AJP 1.3 Connector on port 8009 -->

<Connector port="8009" protocol="AJP/1.3" backlog="200"

address="127.0.0.1" maxThreads="500"

useBodyEncodingForURI="true" enableLookups="false" connectionTimeout="600000"/>

Note: Testing was performed using the following server parameters:

  • Dell PowerEdge M610
  • Xeon E5620 @ 2.4 Ghz - 8 cores 4GB RAM 300GB Hard Disk SAS 15K - Raid

Directory tree

The Endpoint Security Management E80 server supports up to 50,000 AD objects (users, devices, OUs and groups).

Important: If your AD holds more nodes than defined above, please make sure that you scan only a portion of your AD that meets the above requirement.

Client Deployment

The Endpoint Security Management server supports deployment of batches of 300 clients.

This solution is about products that are no longer supported and it will not be updated

Give us Feedback
Please rate this document
[1=Worst,5=Best]
Comment