Support Center > Search Results > SecureKnowledge Details
Cluster VIP not seen under "sim if" or "fwaccel if" commands output Technical Level
Symptoms
  • Running the commands "sim if" or "fwaccel if" for clustering interfaces it shows up as "0.0.0.0" instead of the actual Cluster VIP.
  • The interface is set to "Cluster" mode but the output of 'cphaprob -a if'shows it as "non-monitored".
  • cphaconf.elg seems to indicate that it is an unused interface:
    [cphaconf ...] ........ /opt/CPsuite-R80.20/fw1/bin/cphaconf called with these arguments: /opt/CPsuite-R80.20/fw1/bin/cphaconf -D -i 1 -n 4602 -c 2 -m 3 -l 1 -t Sync -d eth2-01 -d eth2-02 -A -p 0 -z 1 -N 254 -u FW-LPN-AMD-PRIM,FW-LPN-AMD-SEC start
    [cphaconf ...] ........ get_bond_ls_configuration_from_file: Loading bond LS configuration file: /opt/CPsuite-R80.20/fw1/conf/cpha_bond_ls_config.conf ...
    [cphaconf ...] ........ get_specific_vlan_data_from_file: Loading Specific VLAN data configuration file: /opt/CPsuite-R80.20/fw1/conf/cpha_specific_vlan_data.conf ...
    [cphaconf ...] ........ add_all_not_used_ifs: Auto mode. Querying fw...
    [cphaconf ...] ........ get_not_used_ifs: fw has not used ifname=eth2-01
    [cphaconf ...] ........ get_not_used_ifs: fw has not used ifname=eth2-02
    [cphaconf ...] ........ add_all_not_used_ifs: fw query returned 2 not used ifs
Cause

Interface name added to $FWDIR/conf/discntd.if


Solution
Note: To view this solution you need to Sign In .