Support Center > Search Results > SecureKnowledge Details
Enterprise Endpoint Security Windows Client for ATM Technical Level
Solution

Table of Contents:

  • What's New in Endpoint Security Client for ATM
  • Supported Upgrade Paths
  • Endpoint Security Client Downloads
  • Endpoint Security Server Downloads
  • Management Console Downloads
  • Documentation and Related SecureKnowledge Articles
  • Revision History

 Endpoint Security Homepage is now available.

Notes:

  • Important: Make sure you download the latest SmartConsole to avoid "signature verification failed" messages when uploading the client packages to the SmartConsole.
  • To support SmartLog or SmartView Tracker reporting with Endpoint Security Clients for all supported servers (except R80.20), you must update the log schema. Follow the instructions in sk106662.
  • Starting in E80.85, anonymized incident related data is sent to Check Point ThreatCloud, by default. To learn more see sk129753.
  • The relevant links to downloads are located in the relevant section, i.e., Endpoint Security Server, Management Console, Endpoint Security Clients.
  • The relevant links to documentation are located in the "Documentation" section.
  • It is strongly recommended that you read the E80.86 and higher Endpoint Security Client for ATMs Deployment Guide, before installing this release.
  • This release includes all limitations of earlier releases unless explicitly shown as resolved.

Click Here to Show the Entire Article

What's New in Endpoint Security Client for ATM

Show / Hide this section

New Features

  • Endpoint Security Client for unattended machines, such as ATMs (automated teller machines for bank customers).
  • Endpoint Security Client for ATMs runs without a GUI. 

    Supported Upgrade Paths

    Show / Hide this section
    Upgrade to E83.20 Endpoint Security Client for ATM is available from:
    • E83.11 Endpoint Security Client for ATM
    • E83.10 Endpoint Security Client for ATM
    • E83.00 Endpoint Security Client for ATM
    • E82.55 Endpoint Security Client for ATM
    • E82.50 Endpoint Security Client for ATM
    • E82.40 Endpoint Security Client for ATM
    • E82.30 Endpoint Security Client for ATM
    • E82.20 Endpoint Security Client for ATM
    • E82.10 Endpoint Security Client for ATM
    • E82.00 Endpoint Security Client for ATM
    • E81.40 Endpoint Security Client for ATM
    • E81.30 Endpoint Security Client for ATM
    • E81.20 Endpoint Security Client for ATM
    • E81.10 Endpoint Security Client for ATM
    • E81.00 Endpoint Security Client for ATM
    • E80.96 Endpoint Security Client for ATM
    • E80.95 Endpoint Security Client for ATM
    • E80.94 Endpoint Security Client for ATM
    • E80.92 Endpoint Security Client for ATM
    • E80.90 Endpoint Security Client for ATM
    • E80.89 Endpoint Security Client for ATM
    • E80.88 Endpoint Security Client for ATM
    • E80.87 Endpoint Security Client for ATM
    • E80.86 Endpoint Security Client for ATM
    • E80.71 Endpoint Security client for ATM
    • E80.64 Remote Access VPN client for ATM
    • E75.30 Remote Access VPN client for ATM

    Endpoint Security Client Downloads

    Show / Hide this section
    Important:
      • Starting from E80.85, SandBlast Agent improves coverage of malicious threats by sending anonymized Incident related data to the Check Point Threat Cloud. This feature is turned on by default. For more information, including how to disable this feature, refer to sk129753.

    • To support SmartLog or SmartView Tracker reporting with Endpoint Security Clients for all supported servers (except R80.20), you must update the log schema. Follow instructions in sk106662.
     

    Endpoint Security E83.20 Client for ATM

    Platform Package Description Link
    Windows E83.20 Complete Endpoint Security Client for ATM (32 bit) A package for 32-bit devices that includes Endpoint Complete package for ATM.   (ZIP)
    E83.20 Complete Endpoint Security Client for ATM (64 bit) A package for 64-bit devices that includes Endpoint Complete package for ATM.   (ZIP)

    Endpoint Security Server Downloads

    Show / Hide this section

    Note: In order to download some of the packages you will need to have a Software Subscription or Active Support plan.

    The packages provided below are Legacy CLI packages (not CPUSE packages).     

    R77.30.03

    Clean installation and In-Place Upgrade

    • Before installing the hotfixes, you need R77.30 to be installed and to update CPUSE (sk92449) to the latest build.
    • You must install the R77.30 Jumbo Hotfix for Endpoint Security Server before you install the Endpoint Security Server Package for Gaia OS.
    Order of Installation Package Link
    1 R77.30 Jumbo Hotfix for Endpoint Security Server (TGZ)
    2 R77.30.03 Endpoint Security Server Package for Gaia OS (TGZ)

    R80.30


    Endpoint Security Server Package Link
    R80.30 Endpoint Security Server R80.30  (ISO)

    R80.40


    Endpoint Security Server Package Link
    R80.40 Endpoint Security Server R80.40  (ISO)

    Management Console Downloads

    Show / Hide this section

    Management Console for Endpoint Security Server

    The SmartConsole for Endpoint Security Server allows the Administrator to connect to the Endpoint Security Server and to manage the new Endpoint Security Software Blades.

    Latest Versions

    Endpoint Security Server Package Link
    R80.40 SmartConsole for Endpoint Security Server R80.40 / E83.20 and higher sk165473
    R80.30 SmartConsole for Endpoint Security Server R80.30 / E83.20 and higher sk153153
    R80.30 SmartConsole for Endpoint Security Server R80.30 for BitLocker / E83.20 and higher (EXE)

    Previous Versions

    Endpoint Security Server Package Link
    R80.20 SmartConsole for Endpoint Security Server R80.20 / E83.20 and higher sk137593
    R77.30.03 SmartConsole for Endpoint Security Server R77.30.03 / E83.20 and higher (EXE)
    R77.30 SmartConsole for Endpoint Security Server R77.30 / E83.20 and higher (EXE)
    R80.10 SmartConsole for Endpoint Security Server R80.10 / E8.20 and higher (EXE)
    R77.30 EP6.5 SmartConsole for Endpoint Security Server R77.30 EP6.5 / E83.20 and higher (EXE))
    R77.20 EP6.2 SmartConsole for Endpoint Security Server R77.20 EP6.2 / E83.20 and higher (EXE)
    Show / Hide this section
    Document
    Endpoint Security Server
    R80.40 Release Notes 
    Endpoint Security R80.40 Administration Guide
    R80.30 Release Notes 
    Endpoint Security R80.30 Administration Guide
    Endpoint Security Clients
    E80.86 and higher Endpoint Security Client for ATMs Deployment Guide
    E80.85 and higher Endpoint Security Client for Windows User Guide
    E83.20 Endpoint Security Client for Windows Release Notes

    For more information on Check Point releases see: Maintrain Release map, Maintrain Upgrade map, Maintrain Backward Compatibility map, Maintrain Releases plan.

    For more information on Enterprise Endpoint Security, see:

    You can also visit our Endpoint forum, Remote Access forum, or any other CHECKMATES forum to ask questions and get answers from technical peers and Support experts.

    Revision History

    Show / Hide this section
    Date Description
    19 Oct 2018

    Endpoint Security Client was replaced. The following fixes were added:

    • Resolves a Threat Emulation performance issue during massive I/O activity including Windows OS upgrades.
    • Resolves an Anti-Bot issue that can cause slow performance on web browsers.
    • Resolves an Anti-Exploit compatibility issue with products such as App-V that inject code into protected applications.
    • Resolves a rare issue in which the Firewall blade does not run on upgrades from Windows 7 to Windows 10 with an older version of Endpoint Security client.
    27 Sep 2018 First release of this document.

    Give us Feedback
    Please rate this document
    [1=Worst,5=Best]
    Comment