Support Center > Search Results > SecureKnowledge Details
How to configure specific VPN site to use secondary internet connection on locally managed SMB appliances Technical Level
Solution
  1. Configure link selection:

    1. Go to VPN tab and select Advanced in Site to Site block
    2. Set Outgoing interface selection according to the routing table.


  2. Set manual route to external IP and all encryption domains of other site of the tunnel:

    1. Go to Device tab and choose Routing in Network block
    2. Go to New and set destination as external IP or encryption domain of other site -> Set next hop as needed interface
    3. Set metric more than 0


  3. Reestablish the VPN tunnel

  4. Open terminal of the device and enter the Expert mode.

  5. Delete the relevant Ike:

    #vpn tu
    Select option "7"
    Enter IP address of the site
This solution has been verified for the specific scenario, described by the combination of Product, Version and Symptoms. It may not work in other scenarios.

Give us Feedback
Please rate this document
[1=Worst,5=Best]
Comment