The information you are about to copy is INTERNAL!
DO NOT share it with anyone outside Check Point.
R80.10 SmartConsole Releases
SmartConsole / SmartDashboard
Show more details
Show less details
Table of Contents:
List of Resolved issues per Build
Show the Entire Article
R80.10 SmartConsole releases accumulate GUI client fixes for R80.10.
The below list describes each resolved issue and provides the Build number, in which the fix was included. All resolved issues are included in the Incremental SmartConsole Build starting from the Build number listed in this table (inclusive). In addition, you can find the date when the Build was published.
The Incremental SmartConsole Builds table and this article are periodically updated.
General Availability Build
03 July 2018
For R80.10 Portable SmartConsole, refer to sk116158.
List of Resolved issues per Build
Enter the string to filter the below table:
SmartConsole - General Availability Build 056 (3 July 2018)
In some scenarios (for example, when installing policy on a cluster that some of its members were changed/removed), SmartConsole exits after clicking the install policy dialog.
When reinstalling policy on two cluster members, the override policy dialog does not display all cluster members in the list.
When switching between policy packages and tabs, rulebase scrolling may reset its position. In some cases, this may cause SmartConsole to freeze. Refer to sk127133.
When scrolling up and down in Multi-Domain Management Global Assignment dialog, the table cells information is overlapped.
When the inline layer is under section, the "View in policy" option does not expand the section. As a result, the object is not seen.
In some windows with multi-selection option, selecting multiple cells and changing from prevent / detect at once, causes an "Operation not supported" error.
Editing an internal user object configured with IKE secret in Legacy SmartDashboard fails with "Could not access file for write operation" error. Refer to sk125452.
Irrelevant Japanese character is displayed instead of English character when editing the Security gateway object.
Incorrect policy installation warning "Install policy from the Multi-Domain Server does not support new or upgraded gateways" is shown during global Domain assignment and install from Multi-Domain Management server.
R80.10 SmartConsole Build 042 is linked to the wrong Online help document. Refer to sk128952.
When disabling all Domain rules via "Parent Rule for domain's policy", all rules are actually enforced as active, while appearing disabled.
SmartConsole - General Availability Build 042 (28 May 2018)
VPN Community object cannot be opened after upgrade from R77.30 to R80.10. Refer to sk122180.
Cannot highlight search results in Packet mode.
In rare scenarios, due to bad Primary Management object Log server settings, SmartConsole crashes when opening a Gateway Cluster object. Refer to sk123512.
PMTR-8141, MB-82, 02727080
In Wizard Mode, interfaces of some cluster members are missing. Refer to sk123314.
PMTR-8139, MB-74, 02727025
Cannot navigate Mobile Access Applications when using an auditor's account. Refer to sk123344.
IPv6 addresses do not appear in topology table of VS/VSW.
When sending report to Check Point from the Threat Emulation log card, the report fails with "Failed to send report!" connectivity timeout error. Refer to sk122217.
PMTR-9971, 02510013, 02503754
SmartConsole cursor losing focus on logs view when API is running commands required Publish or Discard. Refer to sk121272.
In some cases, the option to mark the Mobile Access gateway as enforcing Mobile Access Unified policy, is not presented.
When there are many objects (>1000) defined in the database, SmartConsole may become unresponsive.
After searching, the rulebase navigation section does not work (always jumps to the beginning of the policy).
The Overview and Anti-Malware pages show Anti-Spam entries under "Anti-Bot & Anti-Virus" section. Refer to sk97777.
"An error occurred while receiving the HTTP response to..." error when trying to log in to the R80.10 SmartConsole. Refer to sk122073.
"Object name contains space" error message when adding a Log field that contains space to a Filter in SmartEvent GUI. Refer to sk112992.
When Object is used in both "Source" and "Destination" rule columns, the Replace Object function fails with "Replace operation has failed" error if all occurrences in a policy are selected for replacement.
SmartConsole exits with "SmartConsole encountered a serious problem" message after being idle for several hours.
When hovering mouse over tooltip of Service Group or Application Group, it shows wrong number of group members.
"Copy as Image" action copies only part of the rule that appears on the screen.
PMTR-8053, PMTR-11975, 02008198
Identity Agent is now supported on R77.20.31 and higher Small Office Appliances centrally managed by R80.10 Security Management server.
After establishing SIC with newly created secondary Security Management/Log/SmartEvent server, the Hardware is not automatically changing to "Smart-1" and remains on "Open Server" instead.
SmartConsole - General Availability Build 029 (15 Feb 2018)
On non-English user environment, when pressing "System Status" at the bottom of Eventia Analyzer Client toolbar, a new window shows up with user system data. The data inside the Disk Information section has incorrect values and wrong colors (red color for error instead of yellow color for warning). Refer to sk122652.
PORT command is missing for the FTP Commands IPS protection.
For Indicators in Threat Prevention Policy, unselected observables are not enforced by the Security gateway.
In Multi-Domain Management, search according to specific field in the Domain's Gateways and Servers does not work as expected.
When opening a new connection to a Security Management server while being connected to a previous session, the user is offered the opportunity to take-over the existing session. If the user agrees, session take over fails.
SmartConsole - General Availability Build 024 (07 Jan 2018)
The NAT configuration page for all network objects in the Global Domain is disabled.
SmartEvent UI might be closed unexpectedly when re-login with RDP. Refer to sk112238.
The IPv6 address of a dual stack cluster for 1200R/1400 SMB appliance is not saved when creating the cluster in wizard mode.
In some cases, when navigating into the "Events" tab in SmartEvent UI, choosing "Last 30 days", opening the details window, and then closing the UI, it might crash.
"Group selected objects" option does not execute properly in certain scenarios.
"CRL download failed" error in SmartConsole when trying to connect to Security Management or Log server. Refer to sk119134.
SmartConsole displays a wrong action for Threat Prevention protections activation per profile.
Certain objects including Threat policy rule's Action field and certain legacy and Endpoint objects cannot be found with "Where Used" option, even if they are used.
SmartConsole - General Availability 013 (25 Oct 2017)
Opening group containing a very large number (>1000) of objects takes a long time.
Cannot import regulation from R77.x to R80.10 by XML file.
For IP Fragments settings, maximum number of packets is limited to 200 instead of infinite.
Sporadic crashes when viewing the details of various tasks in SmartConsole.
SmartConsole - General Availability Build 005 (10 Aug 2017)
Filtered data in rulebase objects' pickers are not highlighted and not shown correctly when scrolling. In network group editor, when clicking on new item, the IP address column is not shown correctly when scrolling over filtered data.
Cannot enter a string that is longer than 255 characters in URL list of Application/Site editor.
Allowed Peer Gateway is set to any after migrate import.
Clicking "Connect to Domain Server" in Domain Management view sometimes connects to a server on a different Multi-Domain Management server. When adding a Multi-Domain Management server, the new server is always added at the right-most column.
Users with read-only permissions for security rules cannot use copy rule image or copy rule UID options.
Enhancement: Improved ability of "Get interfaces" on the Topology page of the Gateway Properties to retrieve interfaces only, without the existing topology. Refer to sk118518.
SmartConsole - General Availability Build 001 (22 June 2017)
Translated Source column with "Original" object wrongly has a Hide NAT option.