Support Center > Search Results > SecureKnowledge Details
HTTPS Inspection limitations when using Layer4 Distribution Mode (SPD) in R76SP.50 Technical Level
Solution

This article lists HTTPS Inspection limitations when using Layer4 Distribution Mode ("SPD") in R76SP.50:

ID Symptoms
02485781

SSM Layer4 Distribution Mode is not supported (by default) if HTTPS Inspection is enabled.

In order to support the SSM Layer4 Distribution Mode while the HTTPS Inspection is enabled:

  1. Enable the SSM Layer4 Distribution Mode:
    HostName> set distribution l4-mode enabled [...]
  2. Set the values of the following global parameters to 1:
    • fwha_spd_https_forwarding
    • fwha_spd_proxy_forwarding
    Note: This step may cause a momentary outage.
02485779

HTTPS Inspection is not supported if Layer4 CoreXL Distribution Mode is enabled.

In order to work with HTTPS Inspection, Layer4 CoreXL Distribution Mode must be completely disabled by setting the value of the global parameter fwmultik_sport_dispatcher_enabled to 0.

 

Documentation:

Give us Feedback
Please rate this document
[1=Worst,5=Best]
Comment