Support Center > Search Results > SecureKnowledge Details
List of R77.30 Gaia OS build numbers and kernel versions per released image Technical Level
Solution

Background

Different R77.30 images use different OS build numbers and OS kernel versions.

  • Running the Clish command show version all on different R77.30 images will show different OS build numbers.

    Example:

    HostName:0> show version all 
    Product version Check Point Gaia R77.30 
    OS build 123
    OS kernel version 2.6.18-92cp
    OS edition 32-bit
    
  • Running the Clish command rpm -q kernel on different R77.30 images will show different OS kernel versions.

    Example:

    [Expert@HostName:0]# rpm -q kernel
    kernel-2.6.18-92cp_990180014
    

 

List of all R77.30 Gaia build numbers per released R77.30 image

To identify the R77.30 image that is installed on your machine
(these commands have to be run only after completing the First Time Configuration Wizard):

  1. Run the "show version all" command in Gaia Clish and check the "OS build" number.
  2. Run the "rpm -q kernel" command in Expert mode and check the "kernel version" number.
  3. Refer to the table below.

Enter the string to filter this table:

# Release
date
R77.30 Image Download
link
R77.30
Gaia
OS
build
R77.30
Gaia
OS
kernel
version
Supported
models
by R77.30
Major change
in this image
Minimal
supported
Take of
R77.30 Jumbo
Hotfix
21 July 2018 Dual Image R77.30/ R80.10 for 23900 appliances only:
  • R77.30 Gaia Clean Install
  • R80.10 (Take 462)
Link 24 990001005 23900   327, 331 and higher
20  Feb 2018 Dual Image R77.30/ R80.10 for Smart-1 405 / 410 appliances only:
  • R77.30 Gaia Clean Install
  • R80.10 (Take 462)
Link 990001005  Smart-1
(405 / 410 models only)
sk122612  216
19 Feb 2018 

Dual Image R80.10 / R77.30 SHA-256

  • R77.30 Gaia Clean Install
  • R80.10 (Take 462)
Link 990180020  2200
4000
12000
13000
21000
TE250
TE1000
TE2000
Smart-1
UTM-1
Power-1
IP Series
sk122612 216 
18  Feb 2018 

Dual Image R77.30 / R80.10 for 3000 / 5000 / 15000 & 23000 appliances

  • R77.30 Gaia Clean Install
  • R80.10 (Take 462)
Link 990001005 3000
5000
15000
23000
sk122612 216 
17 Feb 2018  R77.30 for 3000 / 5000 / 15000 & 23000 / TE100X, TE250X, TE1000X, TE2000X Sandblast appliances Link 22 990001005  3100
3200
5100
5200
5400
5600
5800
5900
15000
23000
TE100X
TE250X
TE1000X
TE2000X
sk122612 216
16  Feb 2018 R77.30 for 2200 / 4000 / 12000 / 13000 / 21000 / TE250, TE1000, TE2000 / Smart-1 5, 25, 25B, 50, 150 / Smart-1 205, 210, 225, 3050, 3150 / UTM-1 / Power-1 / IP Series appliances Link 5 990180020  2200
4000
12000
13000
21000
TE250
TE1000
TE2000
Smart-1
UTM-1
Power-1
IP Series
sk122612 216
15 Jan 2018 Dual Image R77.30/ R80.10 for Smart-1 405 / 410 appliances only:
  • R77.30 Gaia Clean Install
  • R80.10 (Take 462)
Link 2 990001005 Smart-1
(405 / 410 models only)
Effective February 26, 2018 the R77.30 image has been replaced resolving sk122612
See row #20.
  • Reduced running time for the First Time Configuration Wizard during Security Management Server installation
  • Replacement of Kaspersky Anti-Virus components in accordance with security orders from the United States Department of Homeland Security. (https://www.checkpoint.com/kaspersky/)
  • Integrated support for Smart-1 405 and 410 appliances
  • Upgraded stability enhancements
  • Upgrade option from R77.30 with vSEC Controller to R80.10 is available via CPUSE
  • Integration of R80.10 Jumbo Hotfix - General Availability Take 42 items
14 Aug
2017

Dual Image R77.30 / R80.10 for Smart-1 405 / 410 appliances only:

  • R77.30 Gaia Clean Install
  • R80.10 (Take 421) (default image)
Link 990001005  Smart-1
(405 / 410 models only)
Updated CPUSE Agent to build 1294
    266
    13 June
    2017

    Dual Image R77.30 / R80.10 for Smart-1 405 / 410 appliances only:

    • R77.30 Gaia Clean Install
    • R80.10 (Take 421) (default image)
    Link 2 990001005 Smart-1
    (405 / 410
    models
    only)
    Support for Smart-1 405 / 410 appliances
      266
      12 June
      2017

      Dual Image R80.10 / R77.30:

      Link 3 990001005 3000
      5000
      15000
      23000

      Effective February 26, 2018 the R77.30 image has been replaced resolving sk122612
      See row #18, R77.30 for 3000 / 5000 / 15000 & 23000 appliances.
      See row #19, R77.30 for SHA-256 based certificates

      Release of Dual Image

        216
        11 Feb
        2017
        R77.30 for 3000 / 5000 / 15000 & 23000 / TE100X, TE250X, TE1000X, TE2000X Sandblast appliances Link 10 990001005 3100
        3200
        5100
        5200
        5400
        5600
        5800
        5900
        15000
        23000
        TE100X
        TE250X
        TE1000X
        TE2000X

        Effective February 26, 2018 the R77.30 image has been replaced resolving sk122612
        See row #17.
        Support for 3100 / 5100 / 5900 appliances

          216
          10 Dec
          2016
          R77.30 for 3200 / 5200, 5400, 5600, 5800 / 15000 & 23000 / TE100X, TE250X, TE1000X, TE2000X Sandblast appliances Link 18 990001005 3200
          5200
          5400
          5600
          5800
          15000
          23000
          TE100X
          TE250X
          TE1000X
          TE2000X
          • CPUSE & CPInfo support for SHA-256 based certificates per sk103839
          • Updated Hardware Sensors drivers to resolve sk112829
          198
          9 Dec
          2016
          R77.30 for 2200 / 4000 / 12000 / 13000 / 21000 / TE250, TE1000, TE2000 / Smart-1 5, 25, 25B, 50, 150 / Smart-1 205, 210, 225, 3050, 3150 / UTM-1 / Power-1 / IP Series appliances Link 3 990180020

          2200
          4000
          12000
          13000
          21000
          TE250
          TE1000
          TE2000
          Smart-1
          UTM-1
          Power-1
          IP Series

          Effective February 26, 2018 the R77.30 image has been replaced resolving sk122612
          See row #16.

          • CPUSE & CPInfo support for SHA-256 based certificates per sk103839
          • Threat Emulation self-update engine support for SHA-256 based certificates per sk113333
          84
          8 Oct
          2016
          R77.30 for 3200 / 5200, 5400, 5600, 5800 / 15000 & 23000 appliances Link 5 990180001 3200
          5200
          5400
          5600
          5800
          15000
          23000
          • Updated Hardware Sensors drivers to resolve sk112829
          • Threat Emulation self-update engine support for SHA-256 based certificates per sk113333
          185
          7 Aug
          2016
          R77.30 for 3200 / 5200, 5400, 5600, 5800 / 15000 & 23000 appliances with SSD Link 8 990180001 3200
          5200
          5400
          5600
          5800
          15000
          23000
          • SSD support for 3200/5000/15000/23000 appliances
          • Improved NGTP, NGTX and HTTPS Inspection performance and memory consumption per sk109772
          • Enhanced ISOmorphic Tool support per sk65205
          • Support for "Factory" button on the front panel on 3200 and 5200/5400/5600 appliances
          185
          6 Apr
          2016
          R77.30 for 3200 / 5200, 5400, 5600, 5800 appliances Link 19 990180002 3200
          5200
          5400
          5600
          5800
          • Support for 3200, 5000 appliances
          • Improved NGTP, NGTX and HTTPS Inspection performance and memory consumption per sk109772
          165
          5 Jan
          2016
          R77.30 for 15000 & 23000 appliances Link 123 990180014 15000
          23000
          • Support for 15000 & 23000 appliances
          • Support for 40GbE line card
          111
          4 Sep
          2015
          R77.30 for TE100X, TE250X, TE1000X, TE2000X Threat Emulation Private Cloud (Sandblast) appliances Link 13 990180001 TE100X
          TE250X
          TE1000X
          TE2000X
          Support for TE1000X, TE2000X appliances
            111
            3 Jul
            2015

            Triple Image R77.30 / R75.47 / SmartEvent NGSE:

            Link 5 990180020 2200
            4000
            12000
            13000
            21000
            TE250
            TE1000
            TE2000
            Smart-1
            UTM-1
            Power-1
            IP Series
            Release of R77.30, R75.47 & SmartEvent NGSE Triple image
            (Note: SmartEvent NGSE image is available only on Smart-1 appliances)
              1
              2 Jun
              2015
              R77.30 for TE250X & TE1000X Threat Emulation Private Cloud (Sandblast) appliances N/A 9 990180001 TE250X
              TE1000X
              Support for TE250X & TE1000X appliances
                111
                1 May
                2015
                R77.30 GA Take 204 for 2200 / 4000 / 12000 / 13000 / 21000 / TE250, TE1000, TE2000 / Smart-1 5, 25, 25B, 50, 150 / Smart-1 205, 210, 225, 3050, 3150 / UTM-1 / Power-1 / IP Series appliances Link 204 990180020 2200
                4000
                12000
                13000
                21000
                TE250
                TE1000
                TE2000
                Smart-1
                UTM-1
                Power-1
                IP Series
                Check Point R77.30
                  1

                  Notes:

                  • R77.30 images are sorted by their release date.
                  • R77.30 images for 3200, 5000, 15000 & 23000 appliances are accumulative - i.e., every new image includes the content from previous images. For example, Image #8 includes also the SSD support provided by image #7.

                   

                  Revision History

                  Show / Hide revision history

                  Date Description
                  26 Feb 2017
                  • Replaced R77.30/R80.10 images in rows 9, 11, 15, 16-20
                  09 Aug 2017 
                  • Added a link to updated Dual Image R80.10 / R77.30 for Smart-1 405 / 410 appliances only (row #14)
                  18 July 2017
                  • Added dynamic filter to the main table
                  • Added a link to Dual Image R80.10 / R77.30 (row #12)
                  05 July 2017
                  • Take 266 and higher of R77.30 Jumbo is required for Smart-1 405 / 410 appliances (row #13)
                  02 July 2017
                  • Improved design of this article
                  30 June 2017
                  • Added a link to Dual Image R80.10 / R77.30 for Smart-1 405 / 410 appliances (row #12)
                  26 June 2017
                  • Added a reference to Dual Image R80.10 / R77.30 for Smart-1 405 / 410 appliances
                  • Explicitly specified the supported models of Smart-1 appliances in row #9, row #3 and row #1
                  09 Apr 2017
                  • Added "Smart-1 / UTM-1 / Power-1 / IP Series" appliances in row #9 (Dec 2016)
                  16 Feb 2017
                  • Added the R77.30 image for 3100, 5100, 5900 appliances
                  • Renamed models from "3000" to "3200"
                  • Renamed models from "5000" to "5200, 5400, 5600, 5800"
                  • Renamed models from "2000" to "2200"
                  12 Jan 2017
                  • Corrected the description of the "rpm -q" command
                  16 Dec 2016
                  • First release of this document

                  Give us Feedback
                  Please rate this document
                  [1=Worst,5=Best]
                  Comment