Interface table is empty in SmartView Monitor - in 'Gateway Details' pane - under 'ClusterXL'.

Interface table is empty in the output of "cpstat -f all ha" command:

[Expert@srv00075:0]# cpstat ha -f all
Product name: High Availability
Major version: 6
Minor version: 0
Service pack: 4
Version string: N/A
Status code: 0
Status short: OK
Status long: Refer to the Notification and Interfaces tables for information about the problem
HA installed: 1
Working mode: High Availability (Primary Up)
HA protocol version: 2
HA started: yes
HA state: standby
HA identifier:       2

Interface table
-------------------------------------------------------------------
|Name|IP         |Status      |Verified|Trusted|Shared|Netmask    |
-------------------------------------------------------------------
-------------------------------------------------------------------

Problem Notification table
------------------------------------------------
|Name           |Status|Priority|Verified|Descr|
------------------------------------------------
|Synchronization|OK | 0| 591| |
|Filter |OK | 0| 561| |
|routed |OK | 0| 1143| |
|cphad |OK | 0| 3108| |
|fwd |OK | 0| 3094| |
------------------------------------------------

Cluster IPs table
---------------------------------------------------------------------
|Name    |IP            |Netmask      |Member Network|Member Netmask|
---------------------------------------------------------------------
|eth0    |172.16.10.22  |255.255.254.0|   172.16.10.0| 255.255.254.0|
|eth3    |192.168.199.18|255.255.255.0| 192.168.199.0| 255.255.255.0|
|eth4.242|192.168.242.1| 255.255.255.0| 192.168.242.0| 255.255.255.0|
---------------------------------------------------------------------

Sync table
---------------------------------
|Name|IP          |Netmask      |
---------------------------------
|eth1|192.168.10.2|255.255.255.0|
---------------------------------