Support Center > Search Results > SecureKnowledge Details
Dynamic Routing (e.g., OSPF) does not work on some interfaces in ClusterXL running on Gaia OS
Symptoms
  • Dynamic Routing (e.g., OSPF) does not work on some interfaces in ClusterXL running on Gaia OS.

  • Output of Clish command 'show ospf interfaces' does not show some interfaces after reboot.

  • RouteD trace debug shows lines like these:

    • task_ifaddr_change: Starting ifaddr_change of 192.168.1.20(eth0) for task OSPF2_default for instance default
      OSPF: interface 192.168.1.20(eth0) UP
      OSPF:not starting protocol on interface 192.168.1.20(eth0)
      
    • cpcl_add_cxl_addresses(): Router Discovery should not run with Clustering
Cause

'Router Discovery' is enabled on the problematic interfaces.

IPv6 Router Discovery is not supported on ClusterXL.
IPv6 Router Discovery can be used only with the VRRP clustering solution, or on single Security Gateway.


Solution
Note: To view this solution you need to Sign In .