Support Center > Search Results > SecureKnowledge Details
Poor performance on Unicast Load Sharing ClusterXL when using native/untagged VLANs Technical Level
Symptoms
  • Poor performance on Unicast Load Sharing ClusterXL cluster when using native/untagged VLANs.
  • Removing one member from the cluster resolves the issue.
Cause

Cluster members have a cluster VIP defined on a physical interface which also contains VLANs. From a networking perspective this will work as the connected switch is configured with a Native VLAN.

This configuration is not supported in ClusterXL.

From ClusterXL Administration Guide: "When defining VLAN tags on an interface, cluster IP addresses can be defined only on the VLAN interfaces (the tagged interfaces). Defining a cluster IP address on a physical interface that has VLANs is not supported. This physical interface has to be defined with the Network Objective Monitored Private."


Solution

Remove the native VLAN configuration and define the interface as VLAN tagged.

This solution has been verified for the specific scenario, described by the combination of Product, Version and Symptoms. It may not work in other scenarios.
This solution is about products that are no longer supported and it will not be updated

Give us Feedback
Please rate this document
[1=Worst,5=Best]
Comment