Traffic stops passing through Security Gateway after disconnecting a cable from one of the interfaces
||Security Gateway, ClusterXL, Cluster - 3rd party
|Platform / Model
Static routes were configured on a physical interface.
VLAN interfaces were configured on that physical interface.
OSPF was configured on VLAN interface(s).
When disconnecting a cable from physical interface, on which the VLAN interfaces were configured with OSPF, traffic stops passing through Security Gateway.
Output of '
top command after disconnecting a cable shows that RouteD daemon consumes CPU at high level.
RouteD daemon is stuck in an infinite loop.
Note: To view this solution you need to